Advertisement
SNAPCLOUDBack up every photoUnlimited RAW storage, 30 days freeTry freeSample ad
Advertisement
Advertisement

Sony Europe already released the new A7II firmware update!

SonyA7Iifirmware

One day earlier than expected the new A7II firmware update is already available for download through Sony Eu sites. Here are the links:
UK: Windows / Mac
Germany: Windows / Mac
France: Windows / Mac
Italy: Windows / Mac

Benefits and improvements:

  • Adds the selectable feature for uncompressed 14-Bit RAW image capture(*)
  • Adds support for AF Phase-detection for LA-EA3/LA-EA1
  • Adds custom buttons for MOVIE recording

 

Share this story
Community

Join the discussion

99 Responses

    1. Just give Sony couple of months and chill. They cannot make all of these updates in a day. May be they only put the RAW file in older cameras but I think they will do something for all A7 cameras

        1. But IF it gets an update, it will instantly turn into an A7II without IBIS, smaller grip, different release button placing, wobbly mount and 1 custom button less…

    1. Just go to Custom Menu Settings and you can set one of the Custom Buttons for Movie Recording, but you can’t set anything to the Movie Button

      1. Oh thats a dissappointment:-/ In my dream I would set Finder/Monitor to Movie button but none of these two came with this upgrade.

    1. Tested with fotodiox and sigma 35 and 24 art. Afc and Af work ok, eye Af doesn’t. Sigma 24 is faster that the 35 and both look stable…tested only for 5min. I can safely say that both lenses focus better @1.4 on sony a7ii than on my old Canon 6D body. Finally I can enjoy my sigmas on the A7ii also.

    1. Yes, with the la-ea4 only the built in 15 dedicated PDAF sensors will work. The La-ea3 doesn’t have that and uses the on sensor points.

    2. Nope, the new firmware update automaticly transform your a7II into an A7II+77. The A mount lenses will fit perfectly after the upgrade and you will get 666 points of PDAF as well.

    3. LAEA3 doesn’t have screw drive motor. So it will only work with lenses that has SSM or SAM built in.

      Your LAEA4 is compatible with all A-mount glass, unlike the LAEA3.

    1. True to that!

      Although very happy with an update, I expected “zoom to focus point on playback” as well, which saves moving across your image after pressing c3 to check focus on a shot. Especially when using EVF only. This is definately a software only feature so could heve been implemented without any problems. And even panasonic/canon have done it in older camera’s.

      Also copyright information in meta would have been usefull. As well as being able to put lens information based on steadyshot configuration info in meta. (when using adapted lenses)

      Other missed features which may or may not need different hardware would be :
      – Eye AF in CAF (maybe processor A7ii is too slow)
      – Charging camera on USB while using camera (now disables every function)
      – 720p 120 fps video (maybe sensor readout not fast enough)
      – custom white balance in video mode without the need to switch to still mode first
      – LUT preview when using Slog2 (would be very useful !!!)

  1. I just updated and my A7 II suddenly turned into a A7RII with surrounding angels singing carols to it. Wow, what an early christmas hanukkah present. wow, there is a tree too, with lenses for bells!!

  2. Just update mine and the AF with Metabones 4 and Canon EF lenses is fine now. I have same results than with my 5d3 and with the a7r2!
    I have tested with EF40mm STM, EF100 macro L, EF135mmL, EF24mm L v2

  3. A7m2 updated: Uncompressed RAW, oh yea… And even better: Focus is way quicker, and my 50mm dg ex finally focus on my A7m2. The lumpy LAEA4 will be resting on the shelf, collecting dust.

  4. I have a Sigma Macro A-Mount lens, and I got no phase detection with the EA3 adapter. Guess that is it only Sony A-Mount lenses that will benefit from this feature?

    1. No, only lenses with built in motor. Most likely you have a Sigma lens with screw drive AF. The Sigma lenses with HSM will probably work. Besides, you can’t really expect that all third party lenses are supported by the new firmware. All Sony A-mount lenses with SSM or SAM motor will work. Everything else is just bonus.

    1. I can confirm focusing in low light is so much faster. Rewind 24 hours ago i was dialing ISO up and slowing the shutter to manually focus (because autofocus is impossible!) with a Canon 70-200mm f4 and dialing back settings before taking the photo with a speedlight in manual mode (f4, ISO100 1/200). Now the camera is accurately acquiring focus is dim light before firing flash. Thank you Sony, you have solved 80% of my problems in 24 hours 🙂

      1. good news. but btw you can set the LCD settings effect to “off” if you want to focus manually in dim light (e.g. with flash). no need to change exposure settings before taking the photo.

  5. All of these updates are cool but i’m still wishing for the option to toggle between LCD and Viewfinder via custom button. The sensor is too sensitive!!!!!

    1. EXACTLY what I’ve been asking for over and over. They included this on the a7rii. Can set a custom button to sweitch between lcd/evf. Why is it so darn hard to add this function in an update??

    1. Wait a while. Sony need time to produce these updates. I thought they would not update A7ii either but they did. . It feels same as mobile phone updates now 🙂

    2. I’m not expecting updates but it would be a nice touch. I’m mostly interested in AF improvements which would be possible since the A7 sensor is very similar to the A7II.
      By the way, my A7 is still performing as advertised; no, better than advertised since I’ve spent 2 years to master it instead of buying new every 6 months.

    3. The cpus on the first generation cameras, as well as the sensors, will not support in sensor PDAF. Still good cameras, but sensor technology improved with the second generation units (to allow for this feature).

      1. A7 sensor has PDAF. You don’t need much CPU power to send signal to the lens so I think update is still possible. Common, they even updated NEX-3 before!

  6. Did anyone a focusing video right before and after update or are there only people that do the update as quick as possible and then think:
    “I guess it focuses quicker now (because others say it)”

          1. Only tested my 90/2.8 but it feels faster in bad light and seems to hunt less. Could be placebo though…

      1. This is great. Do you know which Canon to Sony Adapter is working?

        Is the Comlite or any cheap adapter working with the Phase System?

        1. Should work with all of them. I’m using the cheap Fotga adapter, and, while the adapter itself is finicky (it often requires a few power cycles and occasional detaching), when it is functioning, it works beautifully: fast and relatively accurate. I’ve got two more Canon lenses and the metabones iV coming to test with it today, so I’ll have harder data soon.

          1. Im interested in your results. Please let me know your results. Maybe you can measure the time to focus with the different adapters.

    1. That is incredibly impressible if they can really deliver good quality at such minimal size.

      They will have pretty much the whole market to themselves, since nobody else want to make pancake lens for E-Mount. And that’s a huge market when you’re the only player.

        1. I would think a mistake. These are the folks that make the best adapters for e mount for years now. They probably meant 2016. I suppose there will be kickstarter campaign soon. This is what they did for the Owl adapter

  7. Release an LA-EA5 that can AF screw-drive lenses, and I’m there.

    Hell, release an LA-EA6 that has its own (unnecessary now for these II series cameras) AF unit but more focus points than the 4, and I’m there. But I’d prefer a 5 with pass-through to the camera’s AF.

  8. Just installed and tested with Sony 28-75mm f2.8 SAM & Sigma 70-200mm f2.8 SSM. Both show improved focusing speed in combination with the LA-EA3, compared to previous experience with both lenses on LA-EA4. Not earth-shattering, but noticeably faster.

    Will I sell the LA-EA4? Not yet, I still have some non-SSM Minolta AF lenses—especially the 85mm f1.4—that I need it for!

  9. Can somebody please explain to me why with this update the LA-EA3 is now a better choice? Currently I use the sony a7ii and LA-EA4 with ZA 85mm f1.4, 70-200mm G 1st ver, and 24-70mm ZA 1st ver. Should I change my adapter?

    Thank you!

    1. Because now that the Phase detection is used for adapted lenses so through LA-EA3 adapter, the phase detection focus system of A7ii body will be used for A mount lens. It was unable previously and it was slow with Contrast detection. LA-EA3 has more light gathered since it doesn’t have the mirror in the adapter like LA-EA4. LA-EA4 uses its own motor and focus system so it stays unchanged in every bodies you use. However, you can get benefits from using LA-EA3 with the last two lenses, not the ZA 85/1.4 since it still uses screw drive system that requires the motor of LA-EA4. Only A-mount SSM lenses can use LA-EA3 adapter.

      1. Just want to add that if you are planning on using longer telelenses like the 70-400 zoom the LAEA4 will probably still give some speed advantage. For all other use, the LAEA3 is the one to choose.

  10. I am quite disappointed in Sony for not releasing a more robust set of upgrades in this firmware. It’s the first firmware upgrade in nearly a year, and they didn’t even have the courtesy to include a finder/monitor toggle option. They are aware of how important that is to many owners – they implemented it on the A7r2 after all. This firmware is a huge disappointment.

  11. Can somebody confirm if this update brought the minimum shutter setting for AUTO ISO? I already read a comment they didn’t bring on the Finder/Monitor Toggle option and that’s a shame because that is one of the features that I really like about the a77M2 and a99.

    Also, can somebody confirm if there is a way to force the use of PDAF only?

  12. Sony.ca has the Firmware update now, just installed it. I can confirm the new uncompressed RAW files come out to ~47mb each. There appears to be no option for Compressed Lossless RAW, just Compressed and Uncompressed. On the downside the Uncompressed RAW files aren’t supported by Lightroom 5.7.1.

  13. Loving the 2.0 update. Massive AF improvement on all my Canon lenses EXCEPT my 50mm 1.4. Can’t find focus at all?? Just keeps rocking back and forth until I let go of the shutter.

    If I switch back to Contrast AF it works, but it’s slow just like before the update.

    Any ideas greatly are appreciated 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

Search

Search
Advertisement
SNAPCLOUDBack up everyphotoTry freeSample ad

Subscribe to Our Newsletter

*Please also check your spam folder if you don't get the confirmation mail. And mark the mail as "non-spam" to see the future newsletter.

Advertisement
SNAPCLOUDBack up everyphotoTry freeSample ad
Advertisement
Advertisement